`EASTEY SLEEVE WRAPPER - EB50 AUTOMATIC`

For wrapping large products, airport luggage, multi packing, securing several products on a tray as one, for display or shipping. The Eastey sleeve wrapper will do the job, built rugged, the main frame is 2" x 4" x 1/4" steel tube and 12 & 14 gauge steel guards and feeders. The sleeve wrapper produces an open end circle of film around the product, from 2 single wound rolls of film, (one on top and one on bottom). After the product goes through a shrink tunnel, a very tight secure package is produced. Seal areas available at 35", 50" & 70".

AUTOMATIC

An infeed conveyor brings the product to the infeed area. The product trips an eye/switch and is automatically pushed into the seal area. The product pushes the previous product into the shrinking chamber of the tunnel. The seal head does not activate until the pusher arm has cleared the seal area on its return stroke.

AUTOMATIC STANDARD FEATURES

Powered out feed conveyor system
50" seal size = 48" wide x 4' long outfeed conveyor
22" seal head height adjustable
Upper & lower powered film unwind
Film loading from left or right side
upper film rack only 60" off the floor
Hot knife (Duo Seal) self centering system
Casters & levelers
Electrics on left side.
infeed product guides where necessary.
powered inline conveyor system
50" seal size = 48" wide x 4' long infeed conveyor

GENERAL OPTIONS

Non standard Voltage.
Side mounted powered film unwind (at floor level) w/inverter.
Wipe down rollers, adjustable.
Extra set of start/stop push buttons, stand mounted
Infeed & outfeed conveyor can be lengthened.
Counter for multiple pushes before seal is made - left or right angle sleevewrappers only

AUTOMATIC RIGHT OR LEFT ANGLE STANDARD FEATURES

Right or left angle powered infeed, with pneumatic product pusher with adjustable return stroke lengths
Limit switch in pusher area to start cycle once the product is in sealing position.
Dead plate mounted after seal area to stabilize the products.
Infeed product guides where necessary.

MODEL	SEAL DIMENSIONS WIDTH x HEIGHT	MACHINE DIMENSIONS W x H x L	POWER REQUIREMENTS VOLTS - PHASE - AMPS	WEIGHT	AIR REQ
EB50A	50 in x 22 in 127 cm x 56 cm	77 in x 76 in x 98 in 196 cm x 193 cm x 249 cm	220V	1	15	3000 lbs. 1364 KG	3.5 CFM 70 PSI

MODEL

SEAL DIMENSIONS

WIDTH x HEIGHT

MACHINE
DIMENSIONS

W x H x L

POWER REQUIREMENTS

VOLTS - PHASE - AMPS

WEIGHT

AIR
REQ

EB50A

50 in x 22 in

127 cm x 56 cm

77 in x 76 in x 98 in

196 cm x 193 cm x 249 cm

220V

3000 lbs.

1364 KG

3.5 CFM

70 PSI

F.O.B.: ROGERS, MN, USA 55374

WARRANTY: 1 YEAR ON PARTS