EASTEY COMBO UNIT
EM16TTK & EM28TTK
Sealer and tunnel on a common frame and base allows quick set-up for matching
sealer and tunnel for perfect alignment and product transfer every time. A
common frame with casters and one power source (disconnect box), makes this
equipment very mobile.
STANDARD SEALER FEATURES:
Hot knife seal system
Welded frame of ¼" cold rolled steel
5/16-inch bolt holes throughout for strength and commonality of parts
Locking 3" swivel casters
Parts drawer with spare parts kit and instruction manual in base leg of
base
Seal head castings, each use three (3) 5/16"-18 stainless steal set
screws to hold seal head in place
Smooth seal head return with head return cylinder
Spare parts kit
Unique film cradle for quick, easy film adjustment and changeover
Film clamps
Positive actuation of seal system
Wiring is numbered and color coded for ease of repair and replacement
Wider product tray that provides more working area
Magnet clamping
Automatic cycle timing
Electric hole punch or pin perf
Product tray has a film separation lip for ease of
operation.
STANDARD TUNNEL FEATURES:
Positive shrinking of all products assured with 4-directional air flow
(2 sides, top, and bottom)
Bases supplied with locking casters and leveling adjusters
Live roller conveyor system with 3/8" rollers 1 ½" on center
Stainless steel mesh conveyor
Variable speed conveyor
Variable airflow
Sealed bearings, not bushings, on drive and idler shafts
Chain drive powered by an Industrial Gear Motor
Solid state temperature controller
Removable return air screen
Fold down control panel for ease in servicing
7 ½ kW heater bank
Quiet, safe conveyor
Take-away conveyor system on the sealer
WEIGHT, POWER REQUIREMENTS & DIMENSIONS:
WEIGHT:
- EM16TTK 1500 pounds
- EM28TTK 1700 pounds
- VOLTS: 220
- PHASE: 1
- AMPS: 60
- MACHINE DIMENSIONS:
- EM16TTK 36"W X 64"H X 114"L
- EM28TTK 36"W X 64"H X 135"L
- SEAL DIMENSIONS:
- EM16TTK 16" X 20"
- EM28TTK 28" X 20"
- TUNNEL CHAMBER DIMENSIONS:
- EM16TTK 16"W X 10"H
- EM28TTK 16"W X 10"H
OPTIONS AVAILABLE:
Non-standard voltage
Food application finish (off-white)
Left hand model available
Sealer:
- White take-away belt
- Double film rack
- Custom product trays
- Film inverter
- Power film unwind
- Tunnel
- 13 gauge SS mesh belt conveyor system with ½" openings (substituted
for live roller system at no charge)
- Heater bank 10 kW – 220 volt
- Dead roller conveyor system
- High density roller kit for live or dead roller conveyor systems
(covered)
- Teflon tubing on rollers
- 2" hood extension
- Special products and projects
- Tell us what you need
FOB: Rogers, MN, USA 55374
WARRANTY: 1 year on parts
C:\WORDFILE\CUSTOM-Q\COMBO